How to reset oil life on Honda Accord?

Changing your car’s oil yourself is a terrific way to get to know your vehicle better and show that you care about its upkeep. You can get a lot of knowledge and experience from doing this if you have never tried it before, and that’s always satisfying. If you have, you may find that it has therapeutic benefits. After that, remember to turn off the oil warning. Newer Honda Accord models are discussed so that you may learn the ins and outs of this process.

What is the Honda Oil Life System?

It is part of the Maintenance Code. The maintenance instructions include this feature to remind the user when it is time to change the oil. In 2006, Honda introduced maintenance Minder to help drivers remember important maintenance info and dates. Using data about how and where you drive, the system can determine personalized content, such as when you should bring your Honda for service.

After doing maintenance, such as an oil change, it is critical to reset the system on the dashboard. If you forget to reset the oil change indicator after you’ve completed the task, you’ll receive a reminder to do so before it’s time. When the necessary oil change notices are in the message center, you must get an oil change within 14 days or 500 miles to help prevent damage.

How does the Engine Oil Life Indicator work?

Sensors like the oil life monitor can be found in the filter housing of your vehicle’s engine. The sensor monitors oil consumption and alerts you when it’s time to change the oil.

If you keep changing your oil regularly, the oil life indicator will always show 100%. From then on, the proportion will continue to decrease as dirt builds up during regular driving.

Keeping an eye on things like this is crucial to ensure your engine never runs out of oil. The engine may be severely damaged if oil were to run out. However, if the oil life is negative, the car’s computer has determined that the oil needs to be changed sooner than usual, prompting the notice.

How to reset Oil Life on Honda Accord 2013 to 2017 Model Years?

Resetting the oil warning light on a ninth-generation Honda Accord is simpler. Turn the ignition to “On,” then seek for the “SELECT/RESET” button on the right side of the instrument panel if your Accord does not have Honda’s Multi-Information Display. Keep clicking this button until the engine oil life indicator appears on the LCD in the middle of the instrument cluster. When you see that, press and hold the “SELECT/RESET” button until the percentage and service code begin flashing, then keep holding it for another five seconds. A reset of the oil warning light is in order.

If your Honda Accord has a Multi-Information Display, you may turn off the oil warning by using the buttons below the right side of the steering wheel. Keep turning the key until it clicks into the “On” position. Navigate to “Vehicle Settings” using the up and down arrows, and then choose it using the “SEL/RESET” button. When you get to “Maintenance Reset,” press the “SEL/RESET” button to clear the oil indicator.

How to reset Oil Life on Honda Accord 2006 to 2012 Model Years?

It’s best practice for newer cars to turn the key but not the ignition. Procedures for these years are very similar to those for more recent models without a Multi-Information Display. To access the engine oil life indicator, press the panel’s side button and scroll through the available selections. When it appears, press and hold the button for 10 seconds, or until the lights begin to flash. Push and hold the button. Please do it for a few seconds to clear the service code and restore full oil life.

How to reset the Oil Life on 1997 to 2005 Honda Accord Model Years?

The procedure for these production years begins with turning off the vehicle’s ignition. The “SELECT/RESET” button is activated by pressing and holding it, then turning the ignition key from one position to the “ON” position while still holding the button. After about 10 seconds of holding the button, the engine oil life indicator will reset. Following this procedure, you can switch off the vehicle, and upon your next start-up, the oil warning light should no longer be on.

How to reset the Oil Life on 1982-1996 Honda Accord Model Years?

The low oil indicator on the Accord was considerably easier to turn off for the first 15 years of its life. The keyhole to reset the service lights is located near the base of the instrument panel. Insert the key here and leave it till the service light goes out.

What are some problems with the Honda Accord’s Oil Usage?

From 2008 to 2013, some Honda Accords were known to be extremely wasteful with their oil. Both 4-cylinder and V6 vehicles, regardless of mileage, were affected by this issue. A “systematic design error” led to excessive oil usage. Two service bulletins issued by Honda recommended replacing the engine’s piston rings if it consumed more than 1 quart of oil per 1,000 miles. Oil consumption can be lowered by modifying the PCV valve on the engine’s intake manifold, which was done by several owners who did not reach this restriction.

Step-by-Step Guide on How to Reset the Oil Life of Honda Accord

After servicing the oil in your Honda Accord, you should reset the Engine Oil Life. Here are more options for your car maintenance.

2017 to 2022 Models

Using the Steering Wheel Controls

1. Begin by starting engine. You can switch the ignition to the “On” position. Don’t crank the engine just yet.
2. Choose the “Home” option.
3. Locate the “Maintenance” button on the left side of the steering wheel and click it. To make your choice, press the left wheel.
4. You must press and hold the wheel while the Oil Life is showing.
5. To get rid of all maintenance items code, select “Item A Only” or “All Due Items” using the mouse wheel to get only the relevant information displayed.
6. Put some pressure on the wheel, and then let go. Optimal Oil Remaining has been restored to 100%.

Using Touch Screen

Follow the sequence below.

“Home” > “Settings” > “Vehicle” > “Maintenance Info” > “Select Reset Items” > “Oil & Filter” > “Reset“.

2013 to 2016 Models

Using Info Display

1. Turn “On” the ignition switch to start the car. Please do not turn on the engine.
2. Toggle “Engine Oil Life” on and off by pressing the “Select” knob.
3. To make the screen flash, press and hold the “Select” button for more than 10 seconds.
4. The knob must be released, pressed, and held for another 5 seconds.

There should now be no remaining percentage in the Engine Oil Life gauge.

Using Multi-Info Display

1. Turn “On” the ignition switch to activate the vehicle. Please do not turn on the engine.
2. To get to “Vehicle Settings,” use the “Info(Up/Down)” and “SEL/RESET” buttons.
3. Select “Maintenance Reset” by scrolling down the maintenance menu.
4. Select “Reset” to begin over.

2000 to 2012 Models

1. The “SERVICE” indicator lights up whenever the Engine Oil Life drops to 5% or less.
2. Place the key in the “RUN” position on the ignition. Please do not turn on the ignition.
3. To view the remaining engine oil life, turn the “SELECT/RESET” mode.
4. Hold the “SELECT/RESET” button for 10 seconds, then let go.
5. Hold the “SELECT/RESET” button for a full five seconds.
6. Simply turning the key off and on again will do the trick. There should now be no remaining fuel in the engine, and the Engine Oil Life gauge should read 100%.

1992 to 1999 Models

1. Put the key in the “OFF” position of the ignition.
2. You’ll need to simultaneously press the “Select” and “Reset” buttons.
3. Keep holding both buttons down as you turn the key to the “RUN” position. Please do not turn on the ignition.
4. Maintain your 10-second hold on Select and Reset. Please reset the maintenance Needed message.

It is important to remember that it may be necessary to use the keyhole on the dashboard or instrument panel to reset some older models. Turn the engine oil life indicator light green with the key in the ignition.